Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Miami?
Gate parts and welding in Miami typically run $150 to $650 for most residential repairs, with common jobs like hinge rewelding, roller replacement, or a new control board landing in the $180-$420 range. Full custom fabrication or heavier commercial welding climbs to $900-$2,500 or more depending on the gate size and material. Same-day emergency calls and after-hours work add to that base, and coastal salt exposure means Miami gates often need more metal work than the same gate would in a drier climate.
We’re Daystar Gate Repair, and gates are all we work on. Not fences, not garage doors, not general handyman jobs. That focus is why we can quote a LiftMaster control board or a FAAC swing-arm pivot by name and get it on the truck without a second trip.
For a broader look at what we handle, see our Gate Parts & Welding in Miami service page.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what Miami property owners actually pay for the jobs we see most often. These are installed-part-and-labor ranges, not part prices off a shelf.
| Job | Typical Range (Miami, 2026) |
|---|---|
| Hinge rewelding or repair (per hinge) | $95 – $180 |
| Gate frame crack or bent-rail welding | $180 – $420 |
| Roller, track, or guide replacement | $120 – $300 |
| Control board replacement (LiftMaster, Linear, Elite, DoorKing) | $250 – $550 |
| Motor or actuator replacement (Mighty Mule, Ghost Controls, Viking) | $380 – $950 |
| Swing-arm or worm-drive operator repair (FAAC, BFT) | $300 – $750 |
| Safety sensor, photo-eye, or loop detector | $150 – $380 |
| Full gate fabrication (custom steel, residential) | $1,200 – $3,500 |
| Commercial gate welding and fabrication | $900 – $2,500+ |
| Emergency / after-hours call fee | $75 – $200 (added) |
Two things push a Miami gate bill toward the top of a range. First is condition: a single snapped hinge is a $95 fix, but corroded hinges on a 15-year-old gate often mean the whole hinge plate and a section of the frame need rebuilding, and that becomes a $400 job fast. Second is access control complexity. A property manager at a gated community in Brickell dealing with a DoorKing system that’s tied into call boxes, loop detectors, and remote access is paying for diagnostics and integration, not just a swapped board. That’s the kind of electric gate repair that generalist contractors pass on because they don’t carry the brand-specific knowledge or the parts.
What Affects Gate Parts & Welding Pricing in Miami
- Salt air and humidity. Miami’s coastal humidity accelerates rust on steel welds and gate frames faster than inland climates, so welds that might last a decade in Georgia can show corrosion in half that time near Biscayne Bay. Expect more frequent reweld and repaint work on anything facing open water or ocean breeze.
- Hurricane-rated framing and anchors. After a storm season, gates that took wind load often need frame straightening, anchor reinforcement, or post realignment. Miami-Dade wind requirements mean gate anchors and posts are built heavier than most other markets, which adds material and welding time to any structural repair.
- Gate material. Aluminum welds differently than steel and requires a different torch process. Ornamental wrought iron and steel take longer to prep and finish. Knowing the metal before you arrive is why we ask the brand and material when you call.
- Brand and part availability. A Mighty Mule operator is a quick, common residential swap. A FAAC or BFT commercial unit sometimes needs a part that must be scheduled. We stock what we can for the nine brands we service, so most residential jobs stay in the lower half of the range.
- Operator type and control system. A simple slide gate with a wall remote is straightforward. A commercial swing gate wired to a DoorKing entry system, loop detectors, and safety sensors takes longer to diagnose and test, and that labor is reflected in the quote.
- Single vs. multi-gate sites. Property managers who maintain several gates in one community often get better per-gate pricing when we can service them on one visit rather than scheduling three trips.
How to Save on Gate Parts & Welding
There’s no way around some of the work, but a few habits keep Miami gate bills lower.
- Fix small weld failures early. A hairline crack in a frame weld costs a fraction of a full frame rebuild. Left alone through a humid summer, that crack spreads and pulls the hinge out with it.
- Wash the gate metal now and then. Rinsing salt residue off steel and aluminum frames slows corrosion and buys time between weld repairs.
- Know your operator brand before you call. When you tell us it’s a LiftMaster or a Viking upfront, we show up with the right parts and do the job in one visit instead of two.
- Bundle repairs. If a hinge, a roller, and a worn sensor are all going, handling them together on one call is cheaper than three separate service trips.
- Ask for a free estimate. We quote before we start, so there are no surprises on the invoice. Call (855) 752-6802 and we’ll talk through the job.
For the full picture of what our gate parts and welding work covers, including the brands and systems we handle, visit our home page.
FAQs – Gate Parts & Welding Cost
How much does gate welding cost in Miami?
Most residential gate welding in Miami runs $95 to $420 depending on the repair – a single hinge reweld is at the low end and a cracked frame or bent rail is at the high end. Commercial fabrication and heavier structural work start around $900. Call (855) 752-6802 for a free onsite estimate.
Is it cheaper to repair my gate or replace it?
Repair is almost always cheaper, usually by several hundred dollars to a couple thousand. A motor or control board replacement runs $250 to $950, while a new custom residential gate starts around $1,200 and can pass $3,500. Replacement only makes sense when the frame is structurally failing across multiple points. If the operator and frame are sound, we’ll tell you straight that a repair will do the job.
Can you fix my automatic gate the same day?
Yes for most common jobs. Because we carry parts for the nine brands we service – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – we can often complete electric gate repairs on the first visit. Rare commercial parts may need to be scheduled, and we’ll tell you upfront. Call (855) 752-6802 to check availability today.
How much does an electric gate motor replacement cost in Miami?
A residential motor or actuator replacement typically lands between $380 and $950 installed, and commercial swing-arm operator repair on a FAAC or BFT unit runs $300 to $750. The brand and gate weight drive the number. Call (855) 752-6802 and we’ll price it for your specific operator.
Do you charge extra for after-hours or emergency calls?
An emergency or after-hours call adds $75 to $200 to the job total in most cases. A gate stuck open at a gated community is a security concern, so we treat those as priority work. Call (855) 752-6802 to schedule and get a clear quote before we start.
Pricing reflects the Miami market as of 2026. Daystar Gate Repair offers free estimates – call (855) 752-6802.
What Our Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Bryce Delaney"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Dustin Walsh"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Alicia Freeman