Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Miami Homeowners
An electric gate that won’t open leaves you stuck in the driveway or, worse, leaves your property unsecured overnight. Daystar Gate Repair fixes Miami electric gates fast, usually on the same day you call, because gate work is all we do. We arrive with diagnostic tools calibrated for nine gate brands and a truck stocked with parts that generic contractors don’t carry. Call (855) 752-6802 for a free estimate and a straight answer about what’s wrong with your gate.
Rene Castellano leads a team that has repaired thousands of electric gates across Miami, from Coral Gables estate entrances to multi-family complexes near North Bay Village. We know LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems inside and out. When a Miami property calls us about an electric gate, we’d rather diagnose it over the phone than sell you a service call you don’t need.
Key Takeaways:
- Same-day electric gate repair across Miami, Allapattah, and Miami Beach.
- Nine gate brands serviced with OEM and aftermarket parts stocked on the truck.
- Free estimates with the price confirmed before any work begins.
- Single-trade gate specialists, not a handyman who occasionally touches gates.
Gate Opener Repair
Gate Opener Repair addresses the motorized unit that pulls or swings your gate, which in Miami sees hard use from humidity, salt air near the coast, and daily cycling that wears out gears and brushes faster than most people expect.
A gate opener is a workhorse. It runs on a duty cycle most homeowners never think about until the day the gate stalls halfway open or refuses to move at all. Daystar Gate Repair handles opener replacement, arm repair, chain and belt tension issues, and the electrical faults that make operators behave erratically. Repair typically runs $180-$450 depending on the part, and our techs carry common replacement components for Ghost Controls and Mighty Mule units on every truck.
What We Check on Every Opener Call
We test voltage at the board, inspect the capacitor for swelling, and listen to the motor under load. These three checks catch roughly 80% of opener failures in Miami before we quote a part, which means fewer surprises on your invoice. If a $40 capacitor fixes a no-start condition, we tell you that and skip the upsell.
When Repair Isn’t the Smart Move
Some openers, especially units older than 10 years that have already had a motor replaced once, cost more to patch than to retire. We give you an honest comparison of repair vs. replacement cost during the diagnosis, not after. A new Gate Opener Motor install with Daystar includes full calibration and safety-edge testing before we leave, and the price is agreed before we start.
Styles & brands we work with
Automatic Gate Repair
Automatic Gate Repair covers the full automated system, not just the motor: the sensors, the control board, the remote receivers, the safety loops, and the mechanical gate itself.
Automatic gates fail in ways manual gates don’t. A phantom stop, a gate that reverses for no reason, remotes that only work from six feet away, a keypad that stopped accepting codes over a weekend. These symptoms confuse generalist contractors because they span the mechanical and the electronic, and the root cause is rarely obvious. Daystar Gate Repair diagnoses the whole system in one visit, which is why we’re called in after other repair attempts fail. Automatic gate repair in Miami generally runs $150-$500 depending on whether we’re replacing a $30 receiver or a $400 control board.
Sensor and Loop Diagnostics
Most “unexplained” gate behavior traces back to photo eyes out of alignment, a vehicle loop detector that lost its ground, or a safety edge worn through by the gate itself. We test each one independently with a multimeter and in-circuit, so we replace the actual failed component rather than guessing at it.
Control Board and Receiver Work
When a board fails in Miami, the cause is often lightning, power surges, or crab-ant corrosion in coastal neighborhoods like Key Biscayne. We diagnose board-level faults with the gate in place, and quote the repair before removing a single connector. This is where brand-specific training pays off, because a FAAC board fails differently from a DoorKing board, and the fix isn’t the same.
Electric Gate Motor
Electric Gate Motor replacement is the most involved repair we do, and getting it right means matching motor torque to gate weight, swing path, and cycle duty, not just bolting in whatever fits.
A driveway gate motor that’s undersized for a heavy iron gate will burn out within a year or two. Miami heat shortens motor life further, especially for motors housed in direct sun or enclosures that don’t get airflow. Daystar Gate Repair replaces Electric Gate Motor units on all nine brands, from entry-level Mighty Mule operators to commercial-grade FAAC and BFT systems. Motor replacement runs $350-$1,200 depending on brand and gate size, and the quoted price includes installation, limit setting, and safety testing.
Matching Motor to Your Gate
A motor built for a 300-pound residential gate will fail on a 600-pound commercial gate, and we check gate weight before recommending any replacement motor. On Miami estates with oversized custom gates, we often spec a motor one class higher than the original. That’s the difference between a repair that lasts and one you’ll call about again next summer.
Limit Switches and Torque Settings
Half our motor replacement calls start as a simple limit-switch failure. If the gate slams into the stop post or never fully opens, a $30 part and 20 minutes of adjustment often solves it. We check limit switches and torque settings before condemning a motor, which saves homeowners real money and repeats business for us.
Gate Access Control
Gate Access Control is the system of keypads, remotes, intercoms, and loop detectors that decides who enters and who doesn’t, and it matters just as much as the motor that moves the gate.
A gate that opens mechanically but won’t respond to entry credentials is an access control problem, and it’s often a programming issue rather than a hardware one. Daystar Gate Repair handles keypad reprogramming, remote cloning, intercom integration, and vehicle loop repair for Miami residential and commercial properties. Access control repair runs $120-$400 depending on the component, and we service the full brand range we’re factory-familiar with.
Residential Access Systems
Homeowners in Coconut Grove and Coral Gables often use keypads and smartphone-integrated openers, and we repair both, including Coconut Grove Electric Gate Repair. If your Mighty Mule or Ghost Controls keypad stopped accepting your code or a remote stopped pairing, that’s a 30-minute fix for us on most systems, and we carry replacement keypads for the brands we service.
Commercial and Multi-Tenant Access
Property managers overseeing gated communities in Brownsville or Gladeview need access control that keeps working when a tenant loses a remote or a guest can’t get in, and our Electric Gate Repair in Brownsville covers exactly that. We do component-level repair and programming for DoorKing and Linear access systems, including phone-entry systems and gate-mounted intercoms. No handoff to an integrator: we handle the whole gate system on one ticket.
Commercial Gate Operator
Commercial Gate Operator service covers the heavy-duty slide and swing operators used by gated communities, parking facilities, and commercial properties across Miami, where daily cycling exceeds what residential operators are rated for.
Commercial operators run hundreds of cycles a day in Miami’s sun and humidity, and they require parts and settings that residential equipment doesn’t. Daystar Gate Repair maintains and repairs commercial gate operators daily for property managers from West Little River to El Portal. Pricing is quoted per system after the diagnosis, but expect commercial operator repairs to start around $300 and rise with parts; we’ll give you a written price before any work starts.
Slide Operators and Chain Drive Systems
Cantilever and chain-drive slide gates on commercial properties develop chain stretch, sprocket wear, and idler failure over time. We inspect the full drive path, lube intervals, and block-up points, because a misaligned chain drags down even a new motor. Brand-specific familiarity with Elite and LiftMaster commercial operators lets us replace parts rather than selling you a new operator every time a gate binds.
Gate Operator Preventive Maintenance
For properties that can’t afford a gate-down morning, we set up maintenance visits that catch component wear before it becomes a failure. We check capacitor health, battery backup for fire gate systems, loop sensitivity, and log-limit switch wear. Preventive maintenance at a commercial property is always cheaper than emergency repair at 7 a.m. on a Monday.
Brands We Service
Daystar Gate Repair works on nine gate-operator brands by design, not by accident, because Miami’s market spans everything from entry-level Mighty Mule units on residential driveways to commercial-grade FAAC and BFT systems on high-volume access points. Our techs arrive knowing the common failure modes for each brand, and our truck stock reflects that. Whether you have LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule, we’re prepared to diagnose and repair your specific operator on the first visit, not the third.
We’ve serviced hundreds of Gate Opener Repair jobs on Ghost Controls and Elite systems, and DoorKing commercial operators are a daily call for our access-control work in Miami. Mighty Mule residential gate openers are the most common DIY-installed brand we see, and we’re fluent in their reliability quirks and part compatibility. Whatever you have, the tech who shows up will know your gate. From home driveway remotes to FAAC commercial boards, we handle gate repair, Electric Gate Repair in Miami, and full gate installation under one roof with no subcontractors and no handoffs.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Gate reverses immediately after closing. A safety sensor, loop detector, or obstruction setting is telling the board to re-open. Leaving it unaddressed means your gate stays open when you think it’s secure. Our techs test sensors and loops independently to find which signal is false.
- Gate stalls halfway open or closed. This is usually a failing capacitor, a weak motor, or a mechanical bind in the track. A gate that stalls mid-cycle burns out its motor faster and can damage internal gears, turning a small repair into a full operator replacement.
- Remotes work only from a few feet away. A receiver antenna, a board issue, or signal interference is cutting your remote range. We diagnose remotes, receivers, and antennas as part of a standard repair visit, and often fix the problem without replacing the whole system.
- Motor runs but gate doesn’t move. The drive coupling, chain, or gearbox has failed, usually from years of Miami humidity and salt air. Continued operation with a slipping drive destroys more expensive components, so shut the power off and call us before running it again.
- Keypad or intercom stopped responding. That’s an access control fault, not a mechanical one, and it often means the board isn’t receiving input signals properly. A gate you can’t control is a safety problem, and we treat it with the same urgency as a gate that won’t move.
Our Process, Step by Step
- 1
Phone diagnosis and scheduling. Call (855) 752-6802 and describe what the gate is doing or not doing. We walk through a few checks over the phone, often resolving simple issues without a service call, and schedule a same-day visit if needed.
- 2
On-site testing. The tech tests the system with the gate in place: voltage readings at the board, capacitor health, loop detector sensitivity, safety-edge continuity, and motor amperage under load. We identify the failed component rather than buying your trust with guesswork.
- 3
Written quote before repair. The price is quoted and agreed before any work starts, no exceptions. If a board can be repaired rather than replaced, we’ll tell you, and if a motor is beyond saving, you’ll see the evidence on our multimeter before we make the call.
- 4
Repair and calibration. Parts come off the truck, not out of a catalog, for the brands we service. After repair, we set limits, torque, and safety sensitivities to the manufacturer’s spec for your specific gate weight and travel path, not to a generic default.
- 5
Final walkthrough and documentation. We run the gate through full cycles, verify every remote and keypad credential works, and walk you through what was replaced and why. You get an invoice documenting the repair, and we note maintenance needs for next season.
How Much Does Electric Gate Repair Cost in Miami?
Electric gate repair in Miami typically costs $180 to $500 for most residential repairs, with motor replacement running $350 to $1,200 depending on brand and gate size. A Gate Opener Repair that only needs a capacitor or a limit switch adjustment often lands in the $180-to-$250 range. Automatic Gate Repair involving a control board or receiver usually falls between $250 and $500, while commercial Gate Access Control repairs start around $300 and go up with the component.
Several factors move Miami pricing up or down. Coastal properties from North Bay Village to Key Biscayne see salt corrosion that adds connector and wiring work to the repair. Older gates with discontinued boards cost more in parts because the board must be sourced rather than pulled from stock. Commercial operators run on higher-duty parts that simply cost more. The single biggest way to avoid overpaying: get a written quote before work starts, and use a gate specialist who can diagnose the failed component before replacing anything. Our free estimates include that diagnosis, the part cost, and the labor to install it, and we never start a repair unless the number has your sign-off.
Our Service Area Near Miami
Daystar Gate Repair covers Miami, Electric Gate Repair in Allapattah, Electric Gate Repair in Miami Beach, and the surrounding neighborhoods: Brownsville, Gladeview, North Bay Village, El Portal, Coconut Grove, Key Biscayne, Coral Gables, Miami Shores, and West Little River. We can generally reach most of the city within an hour for emergency gate work, and we schedule around dense neighborhoods to give you an honest arrival window rather than a vague range.
Serving Miami, FL — Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Miami
Electric gate repair is the diagnosis and fixing of automated gate systems: the motor, control board, sensors, remotes, keypads, loop detectors, and the mechanical gate itself. Daystar Gate Repair handles both residential and commercial electric gates, focusing on the nine brands we service daily so diagnosis is faster and parts are on the truck. A repair visit starts with testing the complete system to find the failed component, which keeps the job honest and short.
Most residential electric gate repairs in Miami are completed within one to two hours on the same day we arrive. Motor replacements and control board swaps can take a few hours depending on gate weight and wiring condition. For parts we don’t stock, we order directly through our brand channels and come back for installation, and you’ll know the timeline before we start.
Residential electric gate repair in Miami typically ranges from $180 to $500, with motor replacement running $350 to $1,200 depending on brand and gate configuration. Repair pricing is always quoted and agreed before any work starts, so there are no surprises on the invoice. Call (855) 752-6802 for an exact quote on your gate and symptom.
Yes. Daystar Gate Repair carries parts and service knowledge for Ghost Controls, DoorKing, and Mighty Mule systems in Miami, along with LiftMaster, FAAC, BFT, Linear, Viking, and Elite. Ghost Controls and Mighty Mule are common on Miami residential driveways, while DoorKing operators run throughout Miami commercial properties, and our techs arrive familiar with the failure patterns of each.
Yes, we handle emergency electric gate repair across Miami and can generally reach most neighborhoods within an hour of your call. A gate stuck open is a security exposure and a gate stuck closed blocks access, so we prioritize calls where the gate can’t be secured or residents can’t enter. Call (855) 752-6802 and tell us the symptom, and we’ll get a tech dispatched the same day.
Every repair we complete comes with our service warranty covering the workmanship and the installed part. The specific warranty length depends on the component and manufacturer terms for the part, and we document it on your invoice before leaving. We stand behind the gate work we do in Miami because gate repair is all we do, and repeat business comes from standing behind our work.
Clear debris and overgrowth around the gate, make sure the gate operator has access to the electrical panel, and know where any remotes and keypads are located. If the gate is commercial, have the property access instructions ready so our tech doesn’t wait at the entrance. Nothing else is needed: our techs arrive with diagnostics, tools, and common replacement parts for the brands we service.
Schedule Your Electric Gate Repair Service in Miami Today
Don’t wake up tomorrow to the same gate problem and a day of waiting behind it. Call Daystar Gate Repair at (855) 752-6802 for a free, no-obligation electric gate repair estimate anywhere in Miami. We’ll diagnose the issue, quote the price before any work starts, and have your gate moving again on our first visit. Gate specialists, not generalists.
Written by Rene Castellano, Owner at Daystar Gate Repair, serving Miami, FL.