Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Miami
Electric gate repair in Miami typically runs $220 – $480 for most motor, board, and sensor jobs, and a specialist can often be on site the same day. We work on driveway gates across Miami every week, from Coral Gables to Kendall to the beach side, and we know which brands fail fastest in salt air and which older boards are no longer worth sourcing. If your gate won’t open, won’t close, or grinds halfway and stops, call Daystar Gate Repair at (855) 752-6802 and we’ll diagnose it quickly. The fix is quoted and agreed before any work starts.
Why Daystar Gate Repair Is Miami’s Preferred Electric Gate Repair Company
We’re gate specialists, not generalists. Every technician who rolls into Miami for a gate call works only on gates, which means our trucks carry control boards, limit switches, loop detectors, and replacement remotes for the brands actually installed in this city. When a Coral Gables homeowner calls about a dead DoorKing operator, the tech already knows the failure modes and likely has the part on hand. That’s the difference between one visit and two.
Rene Castellano leads our Electric Gate Repair team, and the standard he sets is simple: diagnose the real problem, fix what’s fixable, and tell you honestly when replacement is the cheaper path. In an older Miami gate, that honesty matters. A 25-year-old board that’s already obsolete isn’t worth a $300 band-aid if the whole operator is near the end of its life. We tell you that before we quote the part.
We also understand Miami’s paperwork side. Because Miami-Dade sits in the High-Velocity Hurricane Zone, a repair that isn’t tied to a product’s NOA, or Notice of Acceptance, can cost you more than the repair itself if it fails a wind-mitigation inspection. We account for that on every job, not just the ones where someone asks.
Styles & brands we work with
Electric Gate Motor in Miami
An electric gate motor in Miami takes a beating that inland operators never see: salt-laden ocean air, year-round humidity, and storm-season power interruptions that strain older units. When we replace or rebuild a motor here, we size it for the gate’s weight and the wind load the county requires, not just whatever was on the post before. For a standard residential swing or slide gate motor replacement in Miami, homeowners should budget $350 – $900 installed, depending on the brand and the gate’s size.
Motor Replacement and Retrofit Work
Older motors on Miami gates often run until they don’t. A 1990s operator with a dead armature or a seized gearbox usually costs more to rebuild than to swap, especially if the brand no longer supplies internals. We’ll tell you when a retrofit makes sense and when a new LiftMaster or FAAC unit rated for coastal exposure is the smarter spend.
Diagnosing Motor Failure Before It Locks You Out
Slow travel, a grinding sound halfway through the cycle, or a motor that hums but won’t move usually signals capacitor or gearbox trouble. Catching it early in Miami keeps you from discovering the failure at 7 a.m. with your car stuck behind the gate. We carry spare capacitors, gear kits, and full replacement motors for most of the brands installed across the city.
Gate Access Control in Miami
Gate access control in Miami means more than a keypad: it’s the intercom, the loop detector, the telephone entry unit, and the safety photocells all working together. On walled HOA communities and commercial properties across Miami, a failed loop detector or a misconfigured keypad doesn’t just annoy; it backs up traffic and triggers board complaints. Typical access-control repairs in Miami run $180 – $450 for a keypad or loop detector, with full telephone entry and card-reader work landing in the $500 – $1,200 range depending on the hardware.
Remote and Keypad Repair
We reprogram remotes, replace worn keypad membranes, and re-sync receivers to new codes when security demands it. In Miami, salty air corrodes keypad contacts faster than inland, so the usual fix is a replacement membrane or a hardwired upgrade, not just fresh batteries.
Safety Sensors and Entrapment Protection
Every automated gate in Miami is legally required to have functioning entrapment protection, photo-eyes or contact edges that reverse the gate if something is in the path. Older gates often lack these entirely. We retrofit safety edges and photoelectric sensors on pre-2000 gates so they hold up under inspection and actually protect people. That’s the point of the code.
Trusted Brands We Service in Miami
Daystar works on nine operator brands, and in Miami we most often see DoorKing, Elite, Ghost Controls, and Mighty Mule on residential and light commercial gates. DoorKing slide operators dominate HOA entries across Kendall and Westchester; Ghost Controls and Mighty Mule are common on newer single-family driveway gates from Palmetto Bay to Pinecrest. We stock local parts for these brands in our Miami service vehicles, which means fewer return trips and a faster fix for you. Your brand, our expertise.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Miami Homes
- Obsolete control boards on pre-2000s operators. A dead logic board on a 25-year-old swing gate operator usually can’t be sourced anymore, so a full operator swap is the only real fix. We’ll tell you that before ordering any parts.
- Sagging ornamental wrought-iron gates in Coral Gables and Little Havana. Corroded hinge posts heave loose in the marl soil, so the whole panel drags even after new hinges. The footing has to be redone, or the sag returns within a year.
- Salt-air corrosion on coastal gates in Miami Beach, Key Biscayne, and Coconut Grove. Galvanized racks, loop detectors, and operator housings eat corrosion years faster within a mile of the water. Hardware that looks fine inland is already failing here.
- Operators that die during a storm outage and won’t release manually. Battery backup and the bypass release both fail when they’ve never been tested. After the power comes back, the gate’s dead and the car’s trapped.
Pricing for Electric Gate Repair in Miami, FL
Basic diagnostics and small repairs like sensor alignment, remote reprogramming, or limit-switch adjustment run $120 – $250 in Miami. A motor capacitor or receiver board runs $180 – $400. A full swing-gate operator replacement lands at $550 – $1,100 installed, and slide-gate operators for larger HOA or commercial gates run $800 – $1,800. What moves the number most is brand, gate weight, and whether the existing wiring can be reused. Send us photos or describe the symptoms and we’ll give you a fixed quote before any work begins. Estimates are free, and the price we quote is the price you approve.
Because Miami-Dade’s NOA product-approval system is unique, we’ve learned that the paperwork matters as much as the motor. Pull a non-approved operator onto a gate inside the High-Velocity Hurricane Zone and the homeowner can lose wind-mitigation credits that took years to earn. The inspection happens after the install. We make sure the product number matches what the county has on file, and we tell you when it doesn’t, before the swap, not after.
In Coral Gables we were called to a 1930s Mediterranean-revival home with an ornamental wrought-iron swing gate whose 20-year-old operator had died and whose hinge post had heaved loose from its footing in the marl. We pulled the obsolete control board, replaced it with a LiftMaster unit rated for the load, then reset the hinge post in new concrete and corrected the sag before re-verifying the safety photocells. The gate now sweeps cleanly and the homeowner’s wind-mitigation documentation stayed intact.
That job taught us what Miami gates all have in common: the mechanical fix is only half the work. The documentation and the county’s approval system are the other half. We handle both.
We Also Serve Cities Near Miami
Daystar runs daily service routes through Allapattah, Brownsville, Coconut Grove, and Coral Gables, with the same parts stocked and the same response times as in Miami proper. If your community uses a shared entry gate, we coordinate with the HOA and the property manager directly. Call (855) 752-6802 and we’ll route the nearest tech.
Serving Miami, FL — Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Miami
Only if the replacement operator carries a valid Miami-Dade NOA and the work is documented correctly. We match the operator to the county’s approval list and give you the paperwork trail the wind-mitigation inspector wants to see. If your gate was never tied to an approved product, we’ll tell you before the swap. Call (855) 752-6802 and we’ll check your current setup for free.
For most pre-2000s boards, replace. The logic boards for those older units are discontinued, and any NOS part you find will be 20 years old and untested. A new operator rated for your gate’s weight costs less in the long run than a repair that fails. We’ll quote both honestly and let you decide.
Because the hinge post itself has usually shifted in the soil or the footing has cracked from corrosion and heave. Tightening hinges on a post that’s moving doesn’t last; the panel sags again within months. The fix is resetting or replacing the post footing, then re-hanging the gate level. In Miami Beach, Key Biscayne, and Coconut Grove this is routine salt-air work.
The manual release usually wasn’t maintained or the battery backup was never installed and tested. Storm-season outages hit Miami gates hard because the unit damages itself when power returns irregularly. We’ll diagnose the release, replace the battery backup if it’s missing, and leave the gate in manual override until the operator’s back online.
Yes. Every automated gate in Miami-Dade needs working photo-eyes, contact edges, or an equivalent reversal system. Pre-2000 gates often have none, and neglecting this is both a safety hazard and a code violation. We retrofit entrapment protection on older gates so they pass inspection and don’t injure anyone.
If your gate won’t open, your operator’s dead, or you need a straight answer on whether repair or replacement is cheaper, call Daystar Gate Repair at (855) 752-6802. We’ll quote the work before we start, explain the Miami-Dade compliance side in plain English, and get your gate moving again.
Written by Rene Castellano, Owner at Daystar Gate Repair, serving Miami, FL.